Integrated Peripherals - Gigabyte GA-890XA-UD3 User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
x OnChip SATA RAID5 Support
OnChip USB 3.0 Support
Onboard GSATA Controller
Onboard GSATA Mode
Onboard ESATA Controller
Onboard ESATA Mode
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard Audio Function
Onboard 1394 Function
Onboard USB 3.0 Controller
Onchip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB Storage detect
Onboard Serial Port 1
higf: Move Enter: Select
F5: Previous Values
OnChip SATA Controller (AMD SB850 South Bridge, SATA3_0~SATA3_5 connectors)
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type (AMD SB850 South Bridge, SATA3_0~SATA3_3 connectors)
Configures the operating mode of the integrated SATA3_0~SATA3_3 controller.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
OnChip SATA Port4/5 Type (AMD SB850 South Bridge, SATA3_4~SATA3_5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the oper-
ating mode of the integrated SATA3_4/SATA3_5 connectors.
IDE Disables RAID for the SATA controller and configures the SATA controller to PATA
mode. (Default)
As SATA Type The mode depends on the OnChip SATA Type settings.
OnChip SATA RAID5 Support (AMD SB850 South Bridge, SATA3_0~SATA3_5 connec-
tors)
Enables or disables RAID 5 support for the SATA controller integrated in the AMD SB850 South Bridge.
This option is configurable only when OnChip SATA Type is set to RAID.
OnChip SATA3.0 Support
Enables or disables the SATA 6Gb/s function integrated in the Chipset. When set to Disabled, the SATA
controller will operate in SATA 3Gb/s mode. (Default: Enabled)
Onboard GSATA Controller (GIGABYTE SATA2 Chip, IDE and GSATA2_6/7 Connectors)
Enables or disables the IDE and SATA controller integrated in the GIGABYTE SATA2 chip.
(Default: Enabled)
Advanced BIOS Features
[Enabled]
[Native IDE]
IDE
Enabled
[Enabled]
[Enabled]
[IDE]
[Enabled]
[IDE]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 47 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup