Product Specifications - Gigabyte GA-890XA-UD3 User Manual

1-2

Product Specifications

CPU Support for AM3 processors:

AMD Phenom
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus  5200 MT/s
Chipset  North Bridge: AMD 790X
 South Bridge: AMD SB850
Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR3 1866(O.C.)

(Go to GIGABYTE's website for the latest supported memory speeds and
memory modules)
Audio  Realtek ALC892 codec
 High Definition Audio
 2/4/5.1/7.1-channel
Support for Dolby

 Support for S/PDIF In/Out
Support for CD In

LAN 1 x Realtek RTL8111D chip (10/100/1000 Mbit)

Expansion Slots  1 x PCI Express x16 slot, running at x16 (PCIEX16)
1 x PCI Express x16 slot, running at x8 (PCIEX8)

3 x PCI Express x1 slots

(All PCI Express slots conform to the PCI Express 2.0)
2 x PCI slots

Multi-Graphics Support for ATI CrossFireX

Technology
Storage Interface  South Bridge:
-
-
GIGABYTE SATA2 chip:

-
-
-
JMicron JMB362 chip:

-
-
iTE IT8720 chip:

-
Hardware Installation
II processor/ AMD Athlon
™
(Note 2)
/1333/1066 MHz memory modules
Home Theater
®
technology
™
6 x SATA 6Gb/s connectors (SATA3_0~SATA3_5) supporting up to 6 SATA
6Gb/s devices
Support for SATA RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2 x SATA 3Gb/s connectors (GSATA2_6, GSATA2_7) supporting up to 2
SATA 3Gb/s devices
Support for SATA RAID 0, RAID 1, and JBOD
2 x eSATA 3Gb/s connectors on the back panel supporting up to 2 SATA
3Gb/s devices
Support for SATA RAID 0, RAID 1, and JBOD
1 x floppy disk drive connector supporting up to 1 floppy disk drive
- 10 -
II processor/
™
(Note 3)
(Note 3)
(Note 1)