Power Management Setup - Gigabyte GA-78LMT-S2P User Manual

Hide thumbs Also See for GA-78LMT-S2P:
Table of Contents

Advertisement

Onboard USB 3.0 Controller (Etron EJ168 USB Controller) j
Enables or disables the Etron EJ168 USB controller. (Default: Enabled)
USB Controllers
Enables or disables the integrated USB controllers. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB Legacy Function
Allows USB keyboard to be used in MS-DOS. (Default: Enabled)
USB Storage Function
Determines whether to detect USB storage devices, including USB flash drives and USB hard drives
during the POST. (Default: Enabled)
Onboard Serial Port
Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.
Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.
j Only for GA-78LMT-USB3.
2-7

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
ACPI Suspend Type
Soft-Off by Power button
USB Wake Up from S3
Modem Ring Resume
PME Event Wake Up
HPET Support
(Note)
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
Power-On by Alarm
x Date (of Month)
x Resume Time (hh:mm:ss)
ErP Support
: Move
Enter: Select
F5: Previous Values
ACPI Suspend Type
Specifies the ACPI sleep state when the system enters suspend.
S1(POS)
Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1
sleep state, the system appears suspended and stays in a low power mode. The
system can be resumed at any time.
S3(STR)
Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state (default). In
S3 sleep state, the system appears to be off and consumes less power than in the
S1 state. When signaled by a wake-up device or event, the system resumes to its
working state exactly where it was left off.
Soft-Off by Power button
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec.
Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
(Note)
Supported on Windows 7/Vista operating system only.
Power Management Setup
[S3(STR)]
[Instant-off]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
Enter
[Soft-Off]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 31 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga-78lmt-usb3

Table of Contents