Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-78LMT-S2P User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
 IGX Configuration
CPU Clock Ratio
CPU NorthBridge Freq.
Core Performance Boost (Note)
CPB Ratio
(Note)
Turbo CPB
(Note)
CPU Host Clock Control
x CPU Frequency(MHz)
PCIE Clock(MHz)
HT Link Width
HT Link Frequency
Set Memory Clock
x Memory Clock
 DRAM Configuration
******** System Voltage Optimized ********
System Voltage Control
x DDR3 Voltage control
x NorthBridge Volt Control
x SouthBridge Volt Control
x CPU NB VID Control
x CPU Voltage Control
Normal CPU Vcore
: Move Enter: Select
F5: Previous Values
• Whether the system will work stably with the overclock/overvoltage settings you made is depen-
dent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in
damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
for advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set the
System Voltage Control item to Auto to optimize the system voltage settings.
IGX Configuration
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Internal Graphics Mode
UMA Frame Buffer Size
x Surround View
VGA Core Clock control
x VGA Core Clock(MHz)
: Move Enter: Select
F5: Previous Values
Internal Graphics Mode
Allows you to determine whether to allocate system memory for the onboard graphics controller.
Disabled Disables the onboard graphics controller.
UMA Allocates memory for the onboard graphics controller from the system memory. (Default)
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
(Note) This item is present only when you install a CPU that supports this feature.
BIOS Setup
MB Intelligent Tweaker(M.I.T.)
[Press Enter]
[Auto]
[Auto]
[Enabled]
[Auto]
[Disabled]
[Auto]
200
[Auto]
[Auto]
[Auto]
[Auto]
x4.00
[Press Enter]
[Auto]
Auto
Auto
Auto
Auto
Auto
1.2750V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
IGX Configuration
[UMA]
[Auto]
Disabled
[Auto]
350
+/-/PU/PD: Value
F6: Fail-Safe Defaults
- 22 -
Menu Level 
2800Mhz
2000Mhz
3100Mhz
2000Mhz
800Mhz
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
Menu Level 
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Item Help