Handset And Loudspeaker Volume - Ericsson Dialog 4220 Lite User Manual

ì
d
ì
u Â
í *5
Ô
Line 1
Dialog 4220 Lite/Dialog 4222 Office

Handset and loudspeaker volume

Use the Volume keys to adjust the volume of the handset or
loudspeaker during a call. Adjust the handset listening volume
when the handset is off hook. Adjust the loudspeaker volume when
dial tone is heard via the loudspeaker, or for Dialog 4222 Office also
during a handsfree call.
Press to change the volume.
On the Dialog 4222 Office phone, a volume symbol is shown for a
few seconds (replacing your extension number). The handset and
loudspeaker volume level is stored.
To adjust the volume during Group Listening:
Replace the handset.
Press to change the volume.
On the Dialog 4222 Office phone, a volume symbol is shown for a
few seconds, instead of the number. The handset and loudspeaker
volume level is stored.
Lift the handset and press.
For people with impaired hearing, the handset hearing volume level
can be extra amplified. To change the level:
Press simultaneously for at least 1 sec.
A tone signal is heard, and the display on the 4222 Office phone
shows
Setting Mode
Press to set or reset the volume level.
Key lamp on indicates amplified volume level. Key lamp off
#
indicates default volume.
Press to finish setting.
When extra amplification has been selected, the Line 1 key lamp
turns off.
Note: A volume level change also effects a headset
connected to the headset outlet.
.
Settings
79