Send Caller Identity Code At Transfer; Dialing During A Connected Call - Ericsson Dialog 4220 Lite User Manual

Ô
Inquiry
*77*
z #
Ô
Transfer
9 z
Dialog 4220 Lite/Dialog 4222 Office

Send Caller Identity Code at transfer

When transferring a call you can send the caller's Identity Code or
number to the receiver's display.
You have a voice connection with an external party on Line 1.
Press to put the call on hold.
Note: You can also press Line 2.
Dial.
Dial the caller's Identity Code or number and press.
z
Call the second party.
Press before or after answer.
The ongoing call is transferred with the caller´s Identity Code or
number.
Note: You can only use this feature if the receiver's phone
is programmed to handle Identity Codes. This feature is
only available in newer versions of the exchange.

Dialing during a connected call

When calling interactive teleservices, e.g. telephone banks, you
need to use Dual Tone Multi Frequency (DTMF) signals. If your
exchange has not been programmed to automatically convert your
entered digits into DTMF signals, you need to activate the feature
during the call.
During an ongoing call:
Press and dial the requested digits.
Entered digits are transmitted as DTMF signals.
Note: Finland, press
1
and dial the required digits.
During Calls
41