Parallel Ringing - Ericsson Dialog 4220 Lite User Manual

Incoming Calls
*21* z #
í
20

Parallel Ringing

Note: This feature is only available in newer versions of the
exchange.
The Parallel Ringing feature makes it possible for an incoming call
to ring several phones simultaneously and for the call to be
answered on any of the phones. The main advantage of this feature
is that you do not risk losing any calls.
The feature requires all the phones involved to be defined in a
Parallel Ringing list, which must be configured and initiated by
your system administrator. Because only calls to a main extension
will be distributed among the phones in the list, this main extension
also needs to be defined.
A call to a specific extension will not be distributed to other phones
in the list, and will only ring that specific extension's phone.
Parallell Ringing can be temporarily disabled by the phone user
using the feature "Internal Follow-me". See also section
Follow-me" on page 45.
To disable Parallel Ringing temporarily
Dial, enter the extension number and press.
If you want to disable Parallel Ringing for all phones defined in the
list, follow the procedure for disabling the feature from the phone
with the main extension number and enter the number of the
answering position.
If you want to disable Parallel Ringing for one specific phone in the
list only, follow the procedure for disabling the feature from this
phone and enter its extension number.
* 2 *
Notes:
U.K., dial
The Follow-me key cannot be used to disable Parallel
Ringing.
Press.
The Follow-me key lamp is now on.
#
Number .
Dialog 4220 Lite/Dialog 4222 Office
"Internal