Epson STYLUS PRO 9000 User Manual page 22

Printer Status menu (PRINTER STATUS MENU)
This menu allows you to see the printer status from the LCD. This
menu contains the following settings.
VERSION (Firmware version)
Shows the firmware version.
INK LEFT-C/M/LC/LM/Y/K (Remaining ink)
Displays the amount of ink left in the Cyan/Magenta/Light
Cyan/Light Magenta/Yellow/Black ink cartridges.
E F
E F
E F
E F
E F
E F
TOTAL PRINTS, WASTE INK, CR MOTOR (Carriage motor life), PF
MOTOR (Paper feed motor life), HEAD UNIT (Head unit
life),CLEANER (Cleaning unit life), CUTTER LIFE
For maintenance service persons only.
Paper Configuration menu (PAPER CONFIG. MENU)
This menu allows you to register four kinds of paper thickness
together with ink drying time from 1 to 4. You can select whether
the paper thickness is determined automatically (STD (standard))
or by the registered value (1, 2, 3, or 4). You can also register the
ink drying time for the STD setting. How to register and recall the
paper thickness setting is described in "Setting the paper
thickness" on page 27.
Cutter Replacement menu (CUTTER REPLACE MENU)
This menu enables you to replace the paper cutter. For a detailed
description, see Chapter 5, "Replacing the Paper Cutter".
(100-81%)
(80-61%)
(60-41%)
(40-21%)
(20-1%)
(less than 1%)
The Control Panel
22