Epson STYLUS PRO 9000 User Manual page 170

LCD
Liquid Crystal Display. Shows various messages according to status of the
printer.
local printer
The printer which is connected to the computer's port directly by interface cable.
media
Materials upon which data is printed, such as roll paper and cut sheets, plain
paper, and special paper.
memory
The part of the printer's electronic system that is used to store information (data).
Some information is fixed and is used to control how the printer operates.
Information that is sent to the printer from the computer is stored in the memory
temporarily. See also RAM and ROM.
MicroWeave
Printing in which images are printed in finer increments to reduce the possibility
of banding and to produce laser-like images. See also banding.
monochrome
This means printing with only one color of ink, which is generally black ink.
nozzle
Fine tubes in the print head through which ink is sprayed on the page. Print
quality may decline if print head nozzles are clogged.
nozzle check
A method for checking the operation of the printer. When you perform a nozzle
check, the printer prints the firmware (ROM) version and a nozzle check pattern.
online help
Helpful comments related to the current window or dialog box.
parallel interface
See interface.
Peer-to-peer networks
Windows 95 and 98 and Windows NT 4.0 support peer-to-peer networking. Any
computer can access the resources of a computer on the network.
PhotoEnhance3
The EPSON software to change the shade of tone, to correct image data and to
change the sharpness of the image data.
port
An interface channel through which data is transmitted between devices.
printable area
The area of a page on which the printer can print. It is smaller than the physical
size of the page due to margins.
170
Glossary