Speaker Assembly - Packard Bell iPower GX Disassembly Manual

2. Remove the modem from the main board.
3. Turn the modem over and unplug the cable from the header on the modem.

Speaker Assembly

To remove the speaker assembly, first remove the top cover (see Top Cover on page 21) and then
perform the following steps:
1. Disconnect the speaker cable connector from the header on the main board.
Fig. 64 Removing the modem.
Fig. 65 Releasing the modem cable.
Fig. 66 Disconnecting the speaker cable.
Packard Bell iPower GX Disassembly Manual
27