Planet VC-202 User Manual page 17

distance of connectivity. The following is the summary table
of transmission setting, bandwidth and distance extensibility
tested for AWG 24 (0.5mm) twisted-pair without noise and
cross talk.
OFF
ON(default)
● CO / CPE
▪ CO (Central Office) – the Master device mode, usually
the CO device will be located at the data center of ISP
or enterprise to link to the backbone.
▪ CPE (customer premises equipment) – the Slave device
mode, usually the CPE device will be located at branch
office, home or remote side as the long reach data re-
ceiver. The CPE can be connect to the PC, IP Camera or
Wireless Access Point and etc network devices.
● Fast and Interleave mode: (For CO Mode only)
▪ Fast mode guarantees a minimum end to end latency
less than 1 ms.
▪ Interleaved mode provides impulse noises protection for
any impulse noise with a duration less than 250 us. In-
terleaved mode has a maximum end to end latency of
10m sec.
DIP-1 DIP-2
Mode Channel
CO Interleave
CPE Fast
DIP-3 DIP-4
Rate Limit
50/20 Mbps
No Limit
SNR
9dB
6dB
1