Table of Contents
Advertisement
asymmetric backbone, but one converter must be Master
(CO mode) and the other one is Slave (CPE mode).
Figure 3-1: VC-201 LAN to LAN connection
3.1.2 VC-201 Connect to Multi-Port Master
In order, to built up a local Internet in apartment, hotel,
campus and hospitality environment.
The Multi-port Master (for example, VC-810S VDSL2 Switch)
need to be placed In the wiring center (MDF room) and
connect to the telephone line system, on the other hand,
need to install a Slave (VC-201 CPE) converter on the
individual client side and connect to the Multi-port Master
through the telephone lines.
When deciding where to put the converter then you must
ensure:
● It is accessible and cables can be connected easily.
● Cabling is away from sources of electrical noise such as
radios, transmitters and power lines and fluorescent light-
ing fixtures.
● Water or moisture can not enter the unit Converter.
20
Advertisement
Table of Contents
