SMC Networks Barricade SMC7004ABR User Manual page 42

Cable/dsl broadband router built-in 4-port 10/100 mbps switch

Hide thumbs Also See for Barricade SMC7004ABR:

Table of Contents

Configuring the Barricade Router

Password Settings

Use this menu to restrict access based on a password. By

default, there is no password. For security you should assign one

before exposing the Barricade Router to the Internet.

Passwords can contain from 3–12 alphanumeric characters and

are not case sensitive.

Note:

Enter a maximum Idle Time Out (in minutes) to define a

maximum period of time for which the login session is maintained

during inactivity. If the connection is inactive for longer than the

maximum idle time, it will perform system logout, and you have to

minutes)

If your password is lost, or you cannot gain access to

the user interface, press the Reset button on the front

panel (holding it down for at least five seconds) to

restore the factory defaults. (The default is no

password.)

Table of Contents