SMC Networks Barricade SMC7004ABR User Manual page 24

Cable/dsl broadband router built-in 4-port 10/100 mbps switch

Hide thumbs Also See for Barricade SMC7004ABR:

Table of Contents

Configuring Client TCP/IP

5. Click on the IP Address tab.

6. In the Adapter drop-down list, be sure your Ethernet adapter

is selected.

7. Click on "Obtain an IP address from a DHCP server".

8. Click OK to close the window.

9. Windows may copy files and will then prompt you to restart

your system. Click Yes and your computer will shut down and

restart.

Obtain IP Settings From Your Barricade Router

Now that you have configured your computer to connect to the

Barricade Router, it needs to obtain new network settings. By

releasing old IP settings and renewing them with settings from

the Barricade Router, you will also verify that you have

configured your computer correctly.

1. On the Windows desktop, click Start/Programs/Command

Prompt.

2. In the Command Prompt window, type IPCONFIG /RELEASE

and press the <ENTER> key.

Table of Contents