SMC Networks Barricade SMC7004ABR User Manual page 29

Cable/dsl broadband router built-in 4-port 10/100 mbps switch

Hide thumbs Also See for Barricade SMC7004ABR:

Table of Contents

3. Locate and

double-click the Local

Area Connection icon

for the Ethernet

adapter that is

connected to the

Barricade. When the

Status dialog box

window opens, click

the Properties button.

4. On the Local Area Connection Properties box, verify the box

next to Internet Protocol (TCP/IP) is checked. Then highlight

the Internet Protocol TCP/IP, and click the Properties button.

5. Select "Obtain an IP address automatically" to configure your

computer for DHCP. Click the OK button to save this change

and close the Properties window.

6. Click the OK button again to save these new changes.

7. Reboot your PC.

Setting Up TCP/IP

Table of Contents