SMC Networks Barricade SMC7004ABR User Manual page 27

Cable/dsl broadband router built-in 4-port 10/100 mbps switch

Hide thumbs Also See for Barricade SMC7004ABR:

Table of Contents

2. Locate and double-click the

Local Area Connection icon

for the Ethernet adapter that

is connected to the

Barricade Router. Next,

click the Properties button.

3. the Local Area Connection Properties box, verify the box next

to Internet Protocol (TCP/IP) is checked. Then highlight the

Internet Protocol (TCP/IP), and click the Properties button.

4. Select "Obtain an IP address automatically" to configure your

computer for DHCP. Click the OK button to save this change

and close the Properties window.

5. Click the OK button again to save these new changes.

6. Reboot your PC.

Configuring a Macintosh Computer

You may find that the instructions here do not exactly match your

screen. This is because these steps and screenshots were

created using Mac OS 8.5. Mac OS 7.x and above are all very

similar, but may not be identical to Mac OS 8.5.

1. Pull down the Apple Menu. Click Control Panel and select

TCP/IP.

Setting Up TCP/IP

Table of Contents