SMC Networks Barricade SMC7004ABR User Manual page 46

Cable/dsl broadband router built-in 4-port 10/100 mbps switch

Hide thumbs Also See for Barricade SMC7004ABR:

Table of Contents

Configuring the Barricade Router

Point-to-Point Tunneling Protocol (PPTP)

Point-to-Point Tunneling Protocol (PPTP) can be used to join

different physical networks using the Internet as an intermediary.

Using the above screen allows client PCs to establish a normal

PPTP session and provides hassle-free configuration of the

PPTP client on each client PC.

Enter the assigned IP address, subnet mask and default gateway

IP address (usually supplied by your ISP), and then the PPTP

User ID, Password and PPPTP Gateway IP address.

Enter a maximum Idle Time Out (in minutes) to define a

maximum period of time for which the PPTP connection is

maintained during inactivity. If the connection is inactive for

longer than the Maximum Idle Time, it will be dropped. (Default:

10 minutes)

Table of Contents