Vauxhall Astra GTC Infotainment Manual page 64

Select Start export to store the
address data of the selected type(s)
on the connected USB drive.
The address data will be stored in
a folder named myPOIs that is
located in the root directory of the
USB drive.
For each exported POI category, e.g.
Restaurant or Private, you will find
a correspondingly named file in that
folder.
Examples:
F:\myPOIs\Restaurant_3.poi or
F:\myPOIs\Private_1.poi, where F:\ is
the root directory of the USB drive.
Note
If files with POI data of the same
category are already stored on the
USB drive in the myPOIs folder,
these old file versions will be
overwritten by equally named new
file versions.
The folder myPOIs and the files with
POI data should not be renamed or
moved into another folder on the
USB drive. Otherwise the
Infotainment system will not be able
to import the address data again.
Importing POI data from a USB drive
Connect a USB drive with POI data
stored on it (details see above) to the
USB port of the Infotainment system,
see section "USB port" 3 48.
To start the import: press the
CONFIG button, select Navigation
settings, select Import individual
POIs and then select Continue.
All POI data stored on the USB drive
is imported to the myPOIs memory of
the Infotainment system.
After the import is finished, the
imported POIs are selectable as
destinations via the Enter
destination menu, see chapter
"Destination input" 3 67.
Creating and importing user defined
POIs
User defined points of interest need
to be defined via GPS coordinates
that can be taken, e.g., from
a topographical map.
The GPS coordinates and further
address data need to be entered into
text files, each file representing a POI
category.
Navigation
Brief description:
1. Create the text files for the POI
data.
2. Enter the desired address data
into the text files.
3. Store the text files with your POI
data on a USB drive.
4. Connect the USB drive to the USB
port of your car's Infotainment
system.
5. Download (import) the text files
with your POI data to the
Infotainment system.
After the import, the addresses can
be selected as destinations for route
guidance.
Detailed descriptions see below.
Creating the text files for POI data
You can assign your favourite
destination addresses to 20 different
POI categories, with each POI
category assigned a number, see
"POI categories and assigned
numbers" below.
For each POI category you need to
create a separate text file.
63