Vauxhall Astra GTC Infotainment Manual page 62

Note
It is not possible to directly remove
individual imported points of interest
from the myPOIs memory.
If you want to remove individual
imported POIs: import updated POI
data to the Infotainment system that
do not contain the address data of
the regarding POIs.
To remove all imported POIs of
a certain category: import an empty
POI data file of the regarding
category to the Infotainment system.
Export POIs
Exports all POI data stored in the
myPOIs memory of the Infotainment
system to a USB drive connected to
the USB port 3 48, see "Exporting and
importing POI data" below.
Delete Home address
Deletes the currently set home
address (displayed in the Enter
destination menu, see chapter
"Destination input" 3 67).
myPOIs announcement
(only Navi 900)
Using this menu option you can
activate and set up the myPOIs
announcer of the Infotainment
system.
If activated and correspondingly set
up, the myPOIs announcer will
automatically notify you via
a message on the display and a beep
when the vehicle approaches a point
of interest stored in the myPOIs
memory, see "myPOIs announcer"
below.
Exporting and importing POI
data
Introductory explanations
Types of POI data
The Infotainment system provides the
following types of points of interest
data:
■ Predefined Points of Interest stored
on the map SD card and indicated
by icons on the map display.
You can store such predefined
POIs in the address book or as
individual POIs in the myPOIs
Navigation
memory of the Infotainment
system, see below.
■ Favourite destination addresses
that were stored in the Address
book.
You can export these address book
data to a USB drive for later use,
e.g., in other cars.
■ Individual POIs: favourite
destination addresses that were
stored in the myPOIs memory.
You can export these individual
POI data to a USB drive for later
use, e.g., in other cars.
■ User defined POIs: favourite
destination addresses that you
defined via GPS coordinates
(taken, e.g., from a topographical
map) and that you entered into text
files.
You can store these user defined
POI data on a USB drive and later
import the data to the myPOIs
memory of the Infotainment
system, see below.
61