Temperature Measurement - UNI-T UT50D Operating Manual

Measurement Operation(11)
The temperature measurement range is from -40
To measure temperature, connect the Meter as follows:
1. Insert the red temperature into the
and the black temperature probe into the COM terminal.
2. Set the rotary switch to .
3. Place the temperature probe to the object being
measured.
The measured value shows on the display.
l The Meter automatically displays the temperature
value inside the Meter when there is no temperature
probe connection.
l The included temperature probe can only be measured
up to 250 . For any mesaurement higher than that,
the rod type temperature probe must be used instead.
Model UT50D: OPERATING MANUAL
( figure 8)
V
23
o o
C ~1000 C.
terminal