Inductance Measurement - UNI-T UT50D Operating Manual

Model UT50D: OPERATING MANUAL
Measurement Operation(8)
Precision readings of resistance = Measurement
displayed reading minus the short circuit value of red
and black test lead.
l For high resistance (>1M ), it is normal taking several
seconds to obtain a stable reading.
l When there is no input, for example in open circuit
condition, the Meter displays "1".
l When resistance measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test.
Inductance measurement has 4 measurement positions
on the rotary switch: 2mH, 20mH, 200mH and 20H.
To test for Inductance, connect the Meter as below:
( figure 6)
20