Measurement Operation; Dc Voltage Measurement - UNI-T UT805 Operating Manual

Measurement Operation

If you have not done so, plug the line cord into the
connector on the rear of the Meter.
A. DC Voltage Measurement (See figure 4)
Warning
To avoid harms to you or damages to the Meter from
electric shock, please do not attempt to measure
voltages higher than 1000V or 750V rms although
readings may be obtained.
To measure DC voltage, connect the Meter as follows:
1. Insert the red test lead into the V/
black test lead into the COM terminal.
2. Press the DCV button. Auto ranging is default, the
Meter will select the appropriate range, and an
annunciator on the display will indicate measurement
units. Or you could select the manual ranging mode
according to the "Selecting a Measurement Range
( , AUTO and Button)" section.
18
terminal and the
Model UT805: OPERATING MANUAL
RL
COM
DCV
(figure 4)