UNI-T UT805 Operating Manual page 36

Note
l
When making frequency measurement, it must comply
with the following scope (a) requirement:
When 10Hz ~ 1Mz : 150mV
When > 1Mz~ 10MHz : 300mV
When > 10Mz~ 50MHz : 600mV
When > 50Mz : Unspecified
l
In the manual range mode, press
down range to the desired range.
be used
l
When frequency measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test, and remove the testing
leads away from the input terminals of the Meter.
34
a 30V rms.
a 30V rms
a 30V rms
to up range or
button cannot
Model UT805: OPERATING MANUAL