UNI-T UT805 Operating Manual page 34

4. The measured value shows on the primary display.
The secondary display shows the measuring range
Note
l
If the tested capacitance has polarity, connect the
red test lead to the capacitor's positive and the black
test lead to the capacitor's negative.
l
When the Meter is in open circuit and manual ranging
mode, press REL to display "0".
l
In the manual range mode, press
down range to the desired range.
be used
l
It is normal to take a longer time when testing a
capacitor value higher than 10 F.
l
The Meter display shows OL indicating the tested
capacitor is shorted or it exceeds the maximum range.
l
When capacitance measurement has been
completed, disconnect the connection between the
testing leads and the circuit under test and remove
the testing leads away from the input terminals of
the Meter.
32
to up range or
button cannot
Model UT805: OPERATING MANUAL