Technical Support - TYAN Tiger K8W S2875 User Manual

drives (optional)
90h Initialize hard-disk controllers
91h Initialize local-bus hard-disk
controllers
92h Jump to UserPatch2
93h Build MPTABLE for multi-
processor boards
95h Install CD ROM for boot
96h Clear huge ES segment
register
97h Fixup Multi Processor table
98h 1-2. Search for option ROMs.
99h Check for SMART Drive
(optional)
9Ah Shadow option ROMs
9Ch Set up Power Management
9Dh Initialize security engine
(optional)
9Eh Enable hardware interrupts
9Fh Determine number of ATA and
SCSI drives
A0h Set time of day
Code Beeps / Description
E9h Initialize Multi Processor
EAh Initialize OEM special code
EBh Initialize PIC and DMA
ECh Initialize Memory type
EDh Initialize Memory size
EEh Shadow Boot Block
EFh System memory test
F0h Initialize interrupt vectors

Technical Support

If a problem arises with your system, you should turn to your dealer for help first. Your
system has most likely been configured by them, and they should have the best idea of
what hardware and software your system contains. Furthermore, if you purchased your
system from a dealer near you, you can bring your system to them to have it serviced
instead of attempting to do so yourself (which can have expensive consequences).
Help Resources:
1. See the beep codes section of this manual.
2. See the TYAN website for FAQ's, bulletins, driver updates, and
other information: http://www.tyan.com
3. Contact your dealer for help BEFORE calling TYAN.
4. Check the TYAN user group: alt.comp.periphs.mainboard.TYAN
C5h
C6h
C7h
C8h
C9h
D2h
E0h
E1h
E2h
E3h
E4h
E5h
E6h
E7h
E8h
Code
F1h
F2h
F3h
F4h
F5h
F6h
F7h
71
http://www.TYAN.com
PnPnd dual CMOS (optional)
Initialize notebook docking
(optional)
Initialize notebook docking late
Force check (optional)
Extended checksum (optional)
Unknown interrupt
Initialize the chipset
Initialize the bridge
Initialize the CPU
Initialize system timer
Initialize system I/O
Check force recovery boot
Checksum BIOS ROM
Go to BIOS
Set Huge Segment
Beeps / Description
Initialize Run Time Clock
Initialize video
Initialize System Management
Mode
Output one beep before boot
Boot to Mini DOS
Clear Huge Segment
Boot to Full DOS