Chapter 4: Diagnostics - TYAN Tiger K8W S2875 User Manual

Discard Changes and Exit
Use this option to exit setup utility and re-boot.
All new selections you have made are not stored into CMOS.
System will use the old settings to boot up.
Discard Changes
Use this option to restore all new setup values that you have made but not saved into
CMOS.
Load Optimal Defaults
Use this option to load default performance setup values.
Use this option when system CMOS values have been corrupted or modified incorrectly.
Load Failsafe Defaults
Use this option to load all default failsafe setup values.
Use this option when troubleshooting

Chapter 4: Diagnostics

Note: if you ex perience problems with setting up your system, always check the following
things in the following order:
By checking these items, you will most likely find out what the problem might have been
when setting up your system. For more information on troubleshooting, check the Tyan
website at: http://www.tyan.com.
4.01 Beep Codes
Fatal errors which halt the boot process are communicated through a series of audible
beeps.
(1) Memory module initialization failed
(a) memory modules might not be plugged in correct configuration
(b) wrong type of memory
(c) bad memory modules
(2) Graphics initialization failed
Before contacting your vendor or Tyan Technical Support, be sure that you note as much
as you can about the beep code length and order that you experience. Also, be ready with
information regarding add-in cards, drives and O/S to speed the support process and
come to a quicker solution.
4.2 Flash Utility
Every BIOS file is unique for the motherboard it was designed for. For Flash Utilities,
BIOS downloads, and information on how to properly use the Flash Utility with your
motherboard, please check the Tyan web site:
CPU, Memory, Video
http://www.tyan.com
63
http://www.TYAN.com