TYAN Tiger K8W S2875 User Manual page 42

3.04.5.1 – Advanced ACPI Configuration Sub-Menu
Use this screen to select options for the ACPI Advanced Configuration Settings. Use the
up and down arrow (á/â) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option. A description of the selected item appears on the
right side of the screen. The settings are described on this page. The screen is shown
below.
Main Advanced
Advanced ACPI Configuration
ACPI 2.0 Support
ACPI APIC Support
Multimedia Timer
BIOS à AML ACPI table
Headless mode
Feature
Advanced ACPI Configuration
ACPI 2.0 Support
ACPI APIC Support
Multimedia Timer
BIOS à AML ACPI table
Headless mode
BIOS Setup Utility
PCI/PnP Boot
[No]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Option
Yes
No
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
http://www.TYAN.com
Security Chipset
Use [ENTER], [TAB] or
[SHIFT_TAB] to select a
field
Use [+] or [-] to configure
system time.
? ? Select Screen
? ? Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Set this value to allow or prevent
the system to be complaint with
the ACPI 2.0 specification.
This option allows you to define
whether or not to enable ACPI
management features.
To enable/disable HPET timer.
Set this value to allow the ACPI
BIOS to add a pointer to an
OEMB table in the Root System
Description Table (RSDT) table.
Note: OEMB table is used to pass
POST data to the AML code
during ACPI O/S operations.
42
Power Exit