Canon Mk2500 User Manual page 42

The printer can print on tube, clear tube, label tape, heat shrink tube, wrap around tape,
plate, and 4mm I.D. strip, but each requires a different type of cassette. Loading a wrong
type of cassette makes it impossible to print characters properly.
Install the ribbon cassette and tube attachment in the machine.
If the wrap around tape guide or media cassette is already installed, remove it first.
Note that the attachment does not come with tube or plate; they must be purchased
separately.
Install the ribbon cassette and the appropriate cassette in the machine.
The wrap around tape guide and attachment are not used, so if they are already installed,
remove them first.
Install the ribbon cassette, the wrap around tape cassette and wrap around tape guide in the
machine. The tube attachment is not used, so if it is already installed, remove it first.
Ordinarily, the tip of the label tape protrudes from the cassette as shown in Fig. 1, but
sometimes the label tape becomes wound all the way into the cassette, as shown in Fig.
2. In this case, pull the label tape out as shown in Fig. 3. If you do not pull the label tape
out before installing the cassette, the message "Start of media not detect." appears and the
printer can not print. This message can be cleared by pressing [Canc].