Canon Mk2500 User Manual page 27

Use this key to feed a printing media forward or
backward ( pages 126 and 128), to replace the
cutter ( page 133), to forcibly full cut a tube or
label tape ( page 131), and so forth.
Use this key to delete all of the text data that
is currently displayed, or to restore the initial
settings.
Use this key to switch between insert mode and
overwrite mode.
Use this key to delete character data that has been
input. When this key is pressed, the character
marked by the cursor is deleted.
Use this key to return to the previous display in
the setup display, or to cancel a printing operation.
If the setup display is currently displayed, hold
down the [Shift] key while pressing the [Canc] key
to return to the text input display. To cancel the
current printing operation immediately, without
waiting for the printing or cutting operation to
end, hold down this key until the printer begins to
beep.
Use this key to delete character data that has been
input. Each time this key is pressed, the character
that precedes the cursor is deleted.
Use this key to find out what page is currently
being displayed. The free memory capacity is also
displayed simultaneously.
Press this key to switch character input between
uppercase and lowercase.
To input symbols, use this key to select or delete
characters.
Use this key to eject a printing media.
Use this key to input symbols.
Use this key to adjust the printing start position
( page 108), to adjust the depth and speed of
half cutting and full cutting (
132), and so forth.
Use this key to select whether or not to use half
cutting, and when to make a full cut.
Use this key to print the entered text on a printing
media.
Use these keys to make selections on the setup
display and in the menus, and to move the cursor
on the text input display. Also on the text input
display, hold down the [Shift] key while pressing
these keys to jump either one page back or one
page ahead.
pages 130 and