Canon Mk2500 User Manual page 106

◄ ►
• The correction value can be specified with the
[+] or [-] key and numeric keys.
You can input a correction value for negative correction.
However, if there is no correction space (part other than
characters), no more correction can be made.
The minimum unit of correction which is handled internally
is 0.085 mm.
If you input the wrong number by mistake, press [Back
Space] to delete the number and then input the correct
number.
The segment length and character alignment settings can be confirmed on display.
Use [◄] and [►] to set values to the right of the decimal point when setting the label length.