►
•
Pressing [ ► ] increases the value in steps of 0.25mm.
Press [ ◄ ] to move the printing start position to the left.
The printing start position can be adjusted up to 2.5 mm to the left or right.
•
The display returns to the character input display. The printing
start position has now been shifted 1mm to the right. Next,
move the vertical position down 0.5mm.
•
The Print Media selection display appears.
▲
▼
•
The Adjustments screen appears.
The vertical position can also be set separately for each print media.
▲
▼
•
The print media size selection screen appears.
▲
▼
•
This selects the print media size for which the adjustment is to
be made.
•
When [Enter] is pressed, the vertical adjustment selection
display appears.
When the print media is 4mm I.D. strip or wrap around tape, size selection is skipped.
▼
•
Pressing [ ▼ ] increases the value in steps of 0.25mm.
Press [▲] to move the vertical position up.
Height can be adjusted up to 0.5 mm upwards or downwards.
•
The display returns to the character input display. The vertical
position has now been shifted down by 0.5mm.