Configuring the optimum route (only TravelPilot E2)
The TravelPilot E2 allows you to configure the optimum route yourself. To do so,
you must adjust the relationship between " f ast route" and " s hort route" . The
factory default setting is 40 to 60.
To set the optimum route,
1 press the MENU button ?.
The setup menu appears in the display.
2 Mark and confirm the NAVI menu item.
The navi setup menu is displayed.
3 Mark and confirm the OPTimum ROUTE menu item.
The menu for selecting the setting is displayed.
4 Use the menu knob : to adjust the percentage ratio of SHORT to FAST. The
further you move the selection bar to the left, the shorter the route will be that
the system selects.
5 Press the OK button ; or the ESC button = to accept the setting.
The navi setup menu is displayed again.
6 Press the ESC button = twice to close the navi setup menu.
INTRODUCTION
NAVIGATION
RADIO
CD / MP3
SE==INGS
NAVI
DISPLAY
TMC
LANGUAGE
CLOCK
NAVI
SPEECH OUT
OPT ROUTE
TMC
SPEECH OPT
OP= ROU=E
SHORT
TMC
5O/5O
CD CHANGER
SETUP
NAV
NAV
FAST
NAV
87
APPENDIX