Blaupunkt TravelPilot E1/E2 Operating Instructions Manual page 86

INTRODUCTION NAVIGATION
4 Select ON or OFF using the menu knob :.
5 Press the OK button ; or the ESC button = to accept the setting.
The navi setup menu is displayed again.
6 Press the ESC button = twice to close the navi setup menu.
Configuring the speech options (only TravelPilot E2)
To switch between the speech output of road numbers (A-roads and motor-
ways) during route guidance and the detailed speech output of traffic jam an-
nouncements during route guidance,
1 press the MENU button ?.
The setup menu appears in the display.
2 Mark and confirm the NAVI menu item.
The navi setup menu is displayed.
3 Mark and confirm the SPEECH OPTion menu item.
The menu for selecting the setting is displayed.
4 Use the menu knob : to select ROAD NUM. for the voice output of road
numbers or TRAF. INFO for the speech output of traffic announcements.
5 Press the OK button ; or the ESC button = to accept the setting.
The navi setup menu is displayed again.
6 Press the ESC button = twice to close the navi setup menu.
RADIO CD / MP3 CD CHANGER SETUP
SE==INGS
NAVI
DISPLAY
TMC LANGUAGE
CLOCK
NAVI
SPEECH OUT
OPT ROUTE
TMC
SPEECH OPT
APPENDIX
86
NAV
NAV