Change The System Pin Code; Reset Your Phone - Binatone Concept Combo 3525 Twin User Manual

7.4.4

Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorised use. The
default system PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.
3. Press <MENU/OK> and
4. Enter the old system PIN.
5. Press <MENU/OK> to display NEW PIN?------, and enter your new
4-digit system PIN.
6. Press <MENU/OK> to display CONFIRM?------, and enter your new
4-digit system PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system
PIN again, entered in Step 5, you must enter the new system PIN at step 5
again.
7. Press <MENU/OK> to confirm
7.4.5

Reset Your Phone

You can reset your phone to the default settings . After a reset, all your
personal settings, call list entries, redial list entries, and answering machine
messages will be deleted but your phonebook remains unchaged.
1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT.
2. Press <MENU/OK>
3. Enter the 4-digit system PIN(default 0000).
4. Press <MENU/OK> to display CONFIRM?
5. Press <MENU/OK> to confirm, and the phone will be reset to its default
settings
the display shows
to display PIN?-----.
42
PIN?------