Unregister A Handset; Modify The Pin Code - Binatone iDECT C5i System User Manual

@
6 Use the keypad to enter the 4-digit PIN code (default PIN code is 0000).
m
7 Press MENU/OK
p
8 Press and hold FIND
After a short while you will hear a confirmation tone on the handset.
@
9 Enter the handset number to you want, or after 7 seconds it will
automatically select the first available one.
You may need to use it for intercom calls.

Unregister a handset

You may need to do this in order to replace a faulty handset.
m
1 Press MENU/OK
.
2 Press UP
m
3 Press MENU/OK
.
4 Press UP
m
5 Press MENU/OK
@
6 Use the keypad to enter the 4-digit PIN code (default PIN code is 0000).
m
7 Press MENU/OK
@
8 Enter the handset number to unregister.
9 You will hear a confirmation tone if the de-registration is successful,
and the de-registered handset will show Unregistered.
Warning: You can de-register the handset you are using.

Modify the PIN code

You need to enter a 4-digit master PIN code if you wish to change the
settings of some functions. The default PIN code is 0000. This function
allows you to change the PIN code to your own preferred number.
m
1 Press MENU/OK
iDECT Help Line (for UK only): 0845 345 9677 (Local Call rate)
m
The display shows Registering....
The display shows the handset numbers available for registration.
This number is displayed on the handset during standby mode.
m
u
or DOWN
m
u
or DOWN
m
The display shows
m
The display shows the handset numbers available for de-registration.
m
to confirm.
p
on the base until the base starts beeping.
to enter the main menu.
d
to select Advanced
to confirm.
d
to select Unregister.
to confirm.
Enter PIN_ _ _ _.
to confirm.
to enter the main menu.
Set.
25