Pin Code; Dial Mode - Binatone SYMPHONY 2210 User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
This is the system PIN -- a four-digit code you may

PIN code

need if you want to register new handsets to your
base unit or access your answering machine remotely.
The default PIN is 0000; you can change it to any
four-d itgit number you' ll remember.
1 Press the MENU then
to BASE
Press the PHONE/OK button twice
Ú
The display shows
2
PIN is still at default 0000, it will skip this input.
Key in the current PIN and confirm using
3
PHONE/OK button
Ú
The display shows
Key in the new PIN and confirm using
4
PHONE/OK button
Ú
The display shows
Key in the new PIN again and confirm using
5
PHONE/OK button
Ú
The PIN code is changed after 'beep'.
(If you key in a wrong PIN code on step, the display
will exit the setting, you
You should normally leave the this setting at

Dial mode

TONE, but if you use the phone as an extension
on a PBX, you may need to change to PULSE.
Press the MENU b utton, then
1
to go to BASE
Press the PHONE/OK button then
2
button to dial mode
http://www.binatone online .com/
Customise your phone system
the or button
to go
PIN CODE . If the current
NEW PIN
NEW Pin
have to repeat above steps.)
the or button
or
39