Install Recommendations For I.08.12 Boot Rom Update - HP ProCurve Series 3400cl Release Notes

Software Management

Install Recommendations for I.08.12 Boot ROM Update

Install Recommendations for I.08.12 Boot ROM Update
When installing the M.10.17 software to load the I.08.12 ROM version, ProCurve recommends that
you use the "fastboot" feature and the "reload" command after updating to M.10.17, as shown below.
ProCurve3400cl#config
ProCurve3400cl(config)# fastboot
ProCurve3400cl(config)# copy tftp flash <ip address of tftp server> M_10_17.swi
The Primary OS Image will be deleted, continue [y/n]? y Validating and Writing System
Software to FLASH...
ProCurve3400cl(config)# reload
Device will be rebooted, do you want to continue [y/n]? y
Rebooting the System
Then reconnect and run the show flash command:
ProCurve3400cl# show flas
Image
-----
Primary Image
Secondary Image : 3506627
Boot Rom Version: I.08.12
Current Boot
Please also refer to "Known Issues" on page 24
M.10.20 software release.
6
Size(Bytes) Date
---------- -------- -------
: 3576793 09/26/06 M.10.17
05/26/06 M.10.07
: Primary
Version
for additional information regarding updating to the