Release M.10.07; Release M.10.08 - HP ProCurve Series 3400cl Release Notes

Software Fixes in Release M.08.51 - M.10.72

Release M.10.07

Stacking (PR_1000311510) — When stacking is enabled, a stack member cannot be
■
'pinged' using the stack number.
■ STP (PR_1000335141) — The output of the 'show span' CLI command displays a numeral
in the 'Type' column, as opposed to terms such as "10/100T".
■ Enhancement (PR_1000309540) — Added support for the J8440B 10-GbE X2-CX4 Trans-
ceiver.
■ Web (PR_1000302713) — When using the web interface and a large amount of stacking
interactions occur, portions of the information from the stack commander may no longer
appear.
Release M.10.07
Problems Resolved in Release M.10.07
■ Crash (PR_1000335747) — Execution of 'configtest' test mode command causes switch
to crash with a message similar to:
Software exception at parser.c:7898. in 'mSess1', task ID = 0x16726c0
-> ASSERT:
Enhancement (PR_1000340595) — Added support for PIM Dense Mode. For details, refer
■
to Chapter 5, "PIM-DM (Dense Mode) on the 5300xl Switches" in the Advanced Traffic
Management Guide for the ProCurve Series 6400cl/5300xl/4200vl/3400cl Switches.
Menu (PR_1000319651) — The Save option on the "Internet (IP) Service" menu screen not
■
working.
■ Ping MIB (PR_1000311510) — If the DNS hostname given to ping was invalid (for example
hp..com) the switch will crash with an "ASSERT in ip_util.c".
■ Transceiver (PR_1000310852) — 10gig LR port has excessive link toggles during bootup.

Release M.10.08

Problems Resolved in Release M.10.08
CLI (PR_1000330553) — Garbage characters displayed in "show snmp-server" cli output.
■
160
failed. Support: This is a test mode command.