HP ProCurve Series 3400cl Release Notes page 79

ProCurve# show sflow agent
Version
Agent Address
Figure 13. Viewing sFlow Agent Information
The show sflow destination command includes information about the management-station's destina-
tion address, receiver port, and owner.
ProCurve# show sflow destination
sflow
Datagrams Sent
Destination Address
Receiver Port
Owner
Timeout (seconds)
Max Datagram Size
Datagram Version Support
Figure 14. Example of Viewing sFlow Destination Information
Note the following details:
■ Destination Address remains blank unless it has been configured on the switch via SNMP.
■ Datagrams Sent shows the number of datagrams sent by the switch agent to the manage-
ment station since the switch agent was last enabled.
Timeout displays the number of seconds remaining before the switch agent will automati-
■
cally disable sFlow (this is set by the mangement station and decrements with time).
■ Max Datagram Size shows the currently set value (typically a default value, but this can
also be set by the management station).
The show sflow sampling-polling command displays information about sFlow sampling and polling on
the switch. You can specify a list or range of ports for which to view sampling information.
1.3;HP;M.10.03
10.0.10.228
Enabled
221
10.0.10.41
6343
admin
333
1400
5
Enhancements
Release M.10.02 Enhancements
69