Release M.10.30; Release M.10.31 - HP ProCurve Series 3400cl Release Notes

Transceiver hotswap (PR_1000390888) — Transceiver hotswap issues:
■
• Simultaneous hotswap of transceivers on both dual-personality ports will only detect a
single change.
• After certain transceiver hotswaps, the in/out LED indicator will not match the current
status of the transceiver.
• Unsupported mIni-GBIC's hotswapped out of dual personality ports will leave the
transceiver in an unknown state of partially inserted.
■ Transceiver hotswap (PR_1000294081) — The hotswap of a J4858A or B revision wire
release style mini-GBIC will result in the switch indicating a port fault condition for that port.
Web UI (PR_1000326265) — Attempting to access the Web UI of a stack member hangs
■
the browser.

Release M.10.30

Problems Resolved in Release M.10.30
Daylight savings (PR_1000364740) — Due to the passage of the Energy Policy Act of
■
2005, Pub. L. no. 109-58, 119 Stat 594 (2005), starting in March 2007 daylight time in the United
States will begin on the second Sunday in March and end on the first Sunday in November.
CLI (PR_1000395256) — The "loop-protect PORT-LIST receiver-action
■
<action>" command does not enable the ports as it should.

Release M.10.31

Problems Resolved in Release M.10.31
CLI (PR_1000240838) — If an invalid time is entered using "clock set" command, the
■
switch responds with an "invalid date" error.
■ CLI (PR_1000199785) — The tab help function (command-completion) for "IP RIP authen-
tication" is inaccurate. The help selection lists "OCTET-STR Set authentication key" when it
should be "ASCII-STR Set RIP auhentication key (maximum 16 characters)."
■ Crash (PR_1000398315) — Under certain conditions when Web Auth is in use, the switch
may crash with a message similar to:
PPC Bus Error exception vector 0x300:
Stack-frame=0x017b0dd0 HW Addr=0x8200a225 IP=0x00508ce4
Task='tHttpd' Task ID=0x17b0fa8
Software Fixes in Release M.08.51 - M.10.72
Release M.10.30
169