HP ProCurve Series 3400cl Release Notes page 43

ProCurve# ping docservr
10.28.229.219 is alive, time = 1 ms
ProCurve# traceroute docservr
traceroute to 10.28.229.219
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 10.28.192.2
2 10.28.229.219
Figure 7. Example of Ping and Traceroute Execution for the Network in
As mentioned under "Basic Operation" on page
only the DNS server's IP address, you must use the target host's fully qualified domain name with
ping and traceroute. For example, using the document server in
ProCurve# ping docservr.pubs.outdoors.com
10.28.229.219 is alive, time = 1 ms
ProCurve# traceroute docservr.pubs.outdoors.com
traceroute to 10.28.229.219
1 10.28.192.2
2 10.28.229.219
Figure 8. Example of Ping and Traceroute Execution When Only the DNS Server IP Address Is Configured
Viewing the Current DNS Configuration
The show ip command displays the current DNS configuration along with other IP configuration
information. If the switch configuration currently includes a nondefault (non-null) DNS entry, it will
also appear in the show run command output.
1 ms
0 ms
Traceroute Target
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 ms
0 ms
First-Hop Router ("B")
0 ms 0 ms
0 ms 0 ms
Figure 5
29, if the DNS entry configured in the switch includes
Figure 5
0 ms
0 ms
Enhancements
Release M.08.89 Enhancements
on Page 32
as a target:
Target's Fully Qualified
Domain Name
0 ms
0 ms
33