Program; Reset; Save; Serial - Barco PDS User Manual

_K==oÉãçíÉ=`çåíêçä
Remote Commands
•
•
•
moldo^j=
•
•
•
•
obpbq
•
•
•
•
•
p^sb=
•
•
•
•
•
pbof^i=
•
•
146
Parameters:
-i (input): 1 - 9
-b: black on preview
-l: logo on preview
-a: A or B path of scaler input on preview
Query Format: PREVIEW -?
Query Response: PREVIEW -i(input) -k -b
Description: Query only command for the input and black button status on
program. If the black or scaler path is not present on program, then these options
are not returned.
Parameters:
-i (input): 1 - 9
-b: black on preview
-l: logo on preview
-a: A or B path of scaler input on preview
Query Format: PROGRAM -?
Query Response: PROGRAM -i(input) -k -b
Description: Reset unit
Command Format: RESET [-f | -s ]
Parameters:
-f : factory reset
or
-s: soft reset
Query Format: N/A
Query Response: N/A
Description: System Save
Command Format: SAVE
Parameters: N/A
Query Format: N/A
Query Response: N/A
Description: Sets the serial port.
Command Format: SERIAL -b (baud) -p (parity/etc.) -h (handshaking)
PDS • User's Guide