3Setting The Interface Standard; Display Barco Logo - Barco R9806700 Installation Manual

Alternative content switcher & router

Table of Contents

14.5.3 Setting the Interface Standard

How to set up the Interface standard

1. From the Serial Communication menu, select the INTERFACE STANDARD item. (menu 14-20)

Interface standard, between brackets, is active and can be changed.

2. Use ENTER button or selection Wheel as toggle switch to enter the required interface standard RS232 or RS422.

If the Interface standard RS422 has been chosen, then, the item RS422 TERMINATION has to be set too.

3. From the Serial Communication menu, select the RS422 TERMINATION item. (menu 14-21)

Note: RS422 Termination: in case more ACSAR units are chained, then, the last one in the chain has to be terminated.

RS422 Termination status, between brackets, is active and can be changed.

4. Use ENTER button or selection Wheel as toggle switch to enter the RS422 Termination status to ON or OFF.

If the Interface standard RS422 has been chosen, then, the item RS422 TERMINATION has to be set too.

SERIAL COMMUNICATION

ACSAR ADDRESS 001

BAUDRATE [115200]

INTERFACE STANDARD [RS232]

RS422 TERMINATION [ON]

Select with ↑ or ↓

then <ENTER>

<EXIT> to return

0HQX

About BARCO logo

The BARCO logon, in a black background window, can be pasted in the image. The place on the image is adjustable.

R5976519 ACSAR 12122002