Changing Thread Density (For Satin Stitch Patterns Only); Returning To The Beginning Of The Pattern - Baby Lock Ellegante2 BLG2-NZ Instruction And Reference Manual

EDITING STITCH PATTERNS
Changing Thread Density
(for Satin Stitch Patterns Only)
After selecting the pattern, press
your preferred thread density.
If the stitches bunch when thread density is
changed to
. If you continue sewing when the stitches
are bunched, the needle may bend or break.
Memo
• Even if you select a new pattern after
changing the thread density, the thread
density remains the same until you change
it.
• You cannot change thread density for a
combined pattern after the combination is
finished.
126
to select
CAUTION
, return the thread density to
Returning to the Beginning of the
Pattern
When sewing character/decorative stitches, you
can return to the beginning of the pattern after trial
sewing or when the stitching is sewn incorrectly.
a
Press the "Start/Stop" button to stop the
machine, and then press
→ Sewing returns to the beginning of the selected
pattern ("W") from the point where sewing was
stopped.
Memo
If this key is pressed when sewing is stopped,
patterns can be added at the end of a
combined stitch pattern. (In this example, "!" is
added.)
.