Baby Lock Crown Jevel BLCJ18 Instruction And Reference Manual page 31

System Information
Serial Number
Type
C-Pod
Handles
Stitch Counters
Lifetime
Trip
Reset
Back
Figure 40
MR 8
7
5
M+ 4
2
MC 1
0
+/-
Back
Figure 41
28
HA010553310
Version
Board
1.12
1.00
1.00 1.10
000005335
000005335
Main
C
9
6 X CE
3 %
.
+ =
Main
System Information
The serial number of the machine is displayed at the
top of the System Information screen. This number
matches the one found on the label at the back of the
machine under the rear handlebar.
Information contained in the white boxes below the
serial number identifies the electronics board version
numbers as well as the version numbers of the Baby
Lock Crown Jewel and its handlebars. The Lifetime
and Trip (or project) stitch counters count the number
of stitches the machine has performed. The Lifetime
count is the total number of stitches made since the
machine was built. The Trip Counter can be reset to
keep track of the number of stitches made during a
given project. To reset this counter, press the blue "Re-
set" button just to the left of the white "Trip" box. The
Lifetime counter cannot be reset and should be used
as an indicator to determine when general machine
maintenance should be performed by an authorized
Baby Lock Retailer.
(Figure 40)
Press the "Main" button to return to the "Regulated" or
"Manual" menu screen or the "Back" button to return
to the "More" menu screen.
Calculator
A basic calculator is provided. (Figure 41)
Press the "Main" button to return to the "Regulated" or
"Manual" menu screen or the "Back" button to return
to the "More" menu screen.