Baby Lock Crown Jevel BLCJ18 Instruction And Reference Manual page 25

86
Speed
Figure 18
More
Figure 19
Manual
Stitch Mode
Figure 20
Regulated
Regulated
Regulated Regulated
Manual
Stitch Mode
Stitch Mode Stitch Mode
Regulated
Regulated Regulated
Needle Stop
Up
Manual Manual Manual
Down
Needle Stop Needle Stop Needle Stop
Up
Up
Down
Down Down
Figure 21
10 SPI
SPI
SR Style
Figure 22
Precision
22
%
94
Speed
10 SPI
10 SPI
SPI
SPI
More
SR Style
SR Style
Precision
Precision
More
Cruise
Cruise
Up
More
More
Speed
When Manual is selected within the Stitch Mode
the motor speed can be increased or decreased by
pressing the Speed "+" or "-" buttons. To increase
the Manual Mode motor speed press the Speed
"+" button. To decrease speed press the Speed "-"
button. This has the same effect as pressing the
"+" or "-" buttons on the machine's handles. The
speed range is between 5% and 100%, or be-
tween 100 and 1800 stitches per minute (SPM).
The percent speed is displayed in the white box
located at the top right side of screen. Stitches
per minute (SPM) is not displayed within the
machine's software. (Figure 18)
More
The "More" button will access the "More" menu
screen, which allows access to lighting options,
sound options, diagnostics menus, system infor-
%
mation and a calculator. (Figure 19)
On/Off Indicator
The box in the center of the top bar turns green
when you press the "Start" button on the handles
10 SPI
to indicate the needle is in motion. When you
press "Stop, " the box will turn red. (Figure 20)
SPI
SR Style
Regulated Mode Screen Button Functions
Stitches Per Inch (SPI)
Precision
Pressing the "+" or "-" buttons near the top right
portion of the screen will increase or decrease
Cruise
the stitches per inch (SPI) setting. The setting
is reflected in the white indicator box at the top
right portion of the screen. This value can be
adjusted between 4 and 18 stitches per inch.
More
(Figure 21 & 22)
Stitch Regulated Style (SR)
The "SR Style" box locate in the middle right-
hand side of the screen indicates whether the
machine is in "Precision" regulated mode or in
"Cruise" rregulated mode. (Figure 22)
Precision
If "Precision" mode is selected, the Baby Lock
Crown Jewel will begin stitching only after the
Start button is pressed and you begin to move the
machine. (Figure 23 on next page.)