Baby Lock Crown Jevel BLCJ18 Instruction And Reference Manual page 22

Insert Bobbin Case into Machine
1.
Turn off the power switch.
2.
Do not lift the lever on bobbin case. Fit the
bobbin case onto the hook spindle in the machine.
Rotate the casing until the open throat keys into
the middle notch in the hook. Push the bobbin
case inward until it clicks into place (Figure 14).
Drawing up the Bobbin Thread
to the Top of the Quilt
1.
After the machine is threaded, locate needle
up/needle down button on the left handle.
Move the machine over the quilt to your starting
location.
2.
While firmly holding the tail of the needle
thread, press the needle up/down button with free
hand, causing the needle to go down through the
fabric and then back to the up position.
3.
Move the machine 2-3 inches while holding
the needle thread in place.
4.
Bobbin thread will pull up through to the top
allowing you to grasp the loop and pull it to the
desired length.
19