Axis Camera Station User Manual page 17

AXIS Camera Station
Workspaces
Camera Management workspace
1
Search field
2
Device Tags
3 Alarms and Tasks tabs
Tasks
Tasks can be performed on one or multiple devices. The following task are available from the Actions menu:
Assign IP address to selected devices, see page 42
User management tasks:
Set password for selected devices
Add user to selected devices
Remove user from selected devices
List users on selected devices
Upgrade firmware for selected devices, see page 40
Set date and time on selected devices
Refresh selected devices
Restart selected devices
Restore selected devices. This will reset most settings, including the password, to their factory default values. The
following settings are not reset: boot protocol (DHCP or static), static IP address, default router, subnet mask, product
interface language, system time, IEEE 802.1x settings.
The status of finished and ongoing tasks is shown in the Tasks tab at the bottom of the workspace. See Alarms and Tasks Tabs, on
page 20.
17