Related Manuals for Axis Camera Station S1016
Summary of Contents for Axis Camera Station S1016
- Page 1 INSTALLATION GUIDE AXIS Camera Station S1016 Recorder AXIS Camera Station S9001 Desktop Terminal...
- Page 2 This document includes instructions for installing Search by product, category, or phrases AXIS Camera Station S1016 Recorder and AXIS Camera • report problems to Axis support by logging in to your Station S9001 Desktop Terminal on your network. Previous private support area experience of networking will be beneficial when installing •...
-
Page 3: Installation Steps
AXIS S1016/AXIS S9001 Installation Guide This installation guide provides instructions for installing AXIS Camera Station S1016 Recorder and AXIS Camera Station S9001 Desktop Terminal. For more information about how to use the product, go to www.axis.com Installation Steps 1. Hardware overview. See page 4. - Page 4 Page 4 AXIS S1016/AXIS S9001 Installation Guide Hardware Overview - Front and Back 1 Power button, power light 8 USB 3.0 connectors (2) 2 Optical-drive bay 9 Drive activity light 3 Microphone connector 10 Power-supply diagnostic light 4 Headphone connector...
- Page 5 AXIS S1016/AXIS S9001 Installation Guide Page 5 Hardware Overview - Graphics Card Panel 1 DVI-I connector 2 DisplayPort connector Hardware overview - Back Panel 1 Mouse connector 8 Keyboard connector 2 Network link integrity light 9 USB 2.0 connectors (2)
-
Page 6: Connect The Cables
Connect the Cables Warning: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional information, see www.axis.com NOTE: Some devices may not be included if you did not order them. - Page 7 AXIS S1016/AXIS S9001 Installation Guide Page 7 4. Connect the power cable(s). 5. Press the power button on the monitor and the computer.
-
Page 8: Set Up Software
Network Configuration AXIS Camera Station can record and play back video from cameras and video encoders that are connected to a LAN (Local Area Network) or to a WAN (Wide Area Network). Depending on the installation, follow the instructions under Network &... -
Page 9: Specification
Width 175.00 mm (6.89 inches) Depth 417.00 mm (16.42 inches) Weight (computer only) 8.00 kg (17.6 lb) AXIS S9001 8.50 kg (18,7 lb) AXIS S1016 Environmental: Operating temperature 5°C to 35°C (41°F to 95°F) 5°C to 45°C (41°F to 113°F)(limited to 65 W or... -
Page 10: Further Information
Page 10 AXIS S1016/AXIS S9001 Installation Guide Further information For more information about the product visit www.axis.com Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and guides. Warranty For information about Axis’ product warranty and thereto related information, see... - Page 12 Ver.1.0 Installation Guide Printed: August 2014 AXIS Camera Station S1016 Recorder AXIS Camera Station S9001 Desktop Terminal © 2014 Axis Communications AB Part No. 58918 © 2013 Dell Inc.