Axis Camera Station User Manual page 15

AXIS Camera Station
Workspaces
1. Click the Smart search button
window will appear in the image and a sensitivity slider will appear in the lower right-hand corner
2. Drag and size the motion window to the desired area of the image.
3. Adjust slider to the proper sensitivity. A high value indicates high sensitivity to motion.
4. Click the Smart search next button to jump to the place in the recording where motion takes place.
Timeline
Select the Timeline tab to view the search result on a timeline.
Recordings are color coded:
Red — Motion detection recording
•
Yellow — Manual recording
•
• Blue — Continuous recording
Green — Failover recording
•
In timeline view, the following toolbar buttons are available:
Play
Export
Selection start marker
Selection end marker
in the toolbar, a Smart search next button will appear in the playback panel, a motion
Play selected recordings.
Export selected recordings to an ASF file. See Export Recordings, on page 40.
Set a start marker in the timeline. The marker defines the start of a time interval and
will be inserted at the same position as the playback marker. Click the button again to
remove the marker.
Set an end marker in the timeline. The marker defines the end of a time interval and will be
inserted at the same position as the playback marker. Click the button again to remove
the marker.
15